Bedside Bassinet For Newborns
ASSEMBLY INSTUCTIONS
Step 1
Expand the bed frame:
1. Flip the foot rack tubes inside the bed frame outward.
2. Flip the foot rack tubes to a level perpendicular to the ground.
Step 2
Installing the storage basket:
Insert the storage basket into the corresponding holes below the foot rack tubes until you hear a "click" indicating it is installed.
Step 3
Installing the bottom bracket:
1.Place the feet of the bottom bracket into the holes above the height adjustment rods until you hear a "click" indicating it is installed.
2. After installing the bottom bracket, fasten the fixed buckles on both sides of the bed bottom to the middle rod of the bottom bracket.
INSTRUCTIONS FOR USE：
Step 1
Height adjustment：
1.Press the adjustment button to adjust the height in 6 gears, the adjustment method is the same on both sides.
2.The round hole in the middle of the foot rack tube displays the gear number.
Step 2
Cradle mode:
Pull down the universal wheels on both sides of the baby bed, flip them up, and switch to cradle mode.
Step 3
CONNECTING THE BIG BED:OPEN THE ZIPPERS ON BOTH SIDES
1. Open the zipper head cover.
2. Pull the two zippers at the side frame opening.
3. Simultaneously press the release buttons underneath the ends of the frame.
4. Lift up the frame, then down and outwards.
5. After flipping down the frame, the connection is complete.
Step 4
Removing the fabric cover
Removing the fabric cover:
Open the zipper cover.
Pull the zipper along the top of the bed frame to remove the fabric cover.
Step 5
Bedside Bassinet Brakes
1. Engage the brake devices on all four swivel wheels of the bedside bassinet to stop it.
2. Lift up the brake devices on all four swivel wheels to allow movement.
Still Need Assistance?
Our knowledgeable and friendly representatives are here to assist you with any questions or concerns you may have. We understand that some problems may require a more personalized approach, and we are committed to ensuring your satisfaction.
