CHECKLIST OF REST & FEAST BABY SWING
Accessory Package Includes:
- Instruction Manual x1 - Adapter x1 - DC Cable x1 - Remote Control x1 - Screwdriver x1 - Screws x4
Step 1
Assembly Instructions:
1.Seat Frame Installation：Insert into the base, align with the hole, and lift seat frame horizontally.
2.Seat Cover Installation：Place cover over seat frame, fasten with Velcro.
3.Canopy Installation：Align canopy buckles with plastic parts on the seat frame sides.
4. Toy Installation：Attach toy puppets to hooks inside the canopy, secure with Velcro.
*To remove the seat, press and lift the push rod on the base simultaneously.
Step 2
Dining Tray Installation:
1. Attach dining tray support to tray bottom. Align with screw holes and secure with screws.
2. Align and attach tray by matching buckles with seat frame joints, press and pull to secure. Tighten the switch upward to lock.
Step 3
Seat Adjustment:
Lowering： Press side adjustment buttons simultaneously.
Raising： Hold both sides of the iron pipe and adjust upward.
Warning：Do not adjust seating while the baby is in the cradle to prevent accidents.
Step 4
Fastening Baby in Seat：
Here’s how to adjust the straps on your backpack and tighten them to the desired length, as shown in the diagram below.
Pass the cloth belt through the top and bottom grids; tighten. Secure baby with safety buckle and cover.
Still Need Assistance?
Our knowledgeable and friendly representatives are here to assist you with any questions or concerns you may have. We understand that some problems may require a more personalized approach, and we are committed to ensuring your satisfaction.
