CHECKLIST OF SIDE-BY-SIDE CONVERTIBLE BABY STROLLER
Note: Before using the stroller, make sure the frame is fully opened and locked in place.
To install the front wheel, slide the front wheel assembly onto the front axle and make sure it is securely fastened to prevent it from coming off.
Convertible Top Use: To open the convertible top, pull the rods forward until the plastic clips on the top lock into place. The top will then open and tighten. To close the convertible top, pull the rods back until the top is fully closed.
Put together and take apart the armrest. Slide the armrest into the slots on both sides to put it together; press the buttons on both sides to take it apart.
To adjust the angle of the backrest: to tilt the backrest forward, press and pull the adjustment button down. To tilt the backrest back, hold the adjustment strap with one hand and pull the button up with the other hand.
Ensuring a Secure Fit
Push the circular buttons on both sides and turn the seat or bassinet to change the angle of the stroller.
Fix the lock after you're done adjusting the seat/bed.
Put together, take apart, and adjust the seat or sleeping basket:Place the clamps on both sides of the seat or sleeping basket into the slots on the frame to assemble it. Press the square buttons to disassemble it, and press the round button to adjust the angle.
Please do not adjust the seat while the baby is sitting in it. The seat can be adjusted by releasing the four safety buckles at the bottom. Switch the bottom buckles to seat mode to change the position of the seat, and release them to switch to sleeping mode.
Six different reclining positions are available by pressing the buttons on either side of the seat/sleeper basket.
Still Need Assistance?
Our knowledgeable and friendly representatives are here to assist you with any questions or concerns you may have. We understand that some problems may require a more personalized approach, and we are committed to ensuring your satisfaction.
